| |
|
 |
Biangular Back Modification with Brackets
- Allows the lower portion to be positioned for proper pelvic alignment while the upper portion can be adjusted for proper back extension and head positioning
- 2 bracket sizes to choose from
- Brackets also sold separately
|
|
 |
Back/Headrest Extension Modification with Bracket
- Provides greater support area for the head
- Easy to remove
- The extension will have the same width as the back, with the same foam and upholstery
- Note: Order height of extension separate from height of the back
- Bracket included with modification
Bracket also sold separately
|
|
 |
Full Width Back Modification
- Changes the width of the back to the approximate width of the wheelchair frame instead of being cut down to fit between the uprights of the wheelchair
- R-Back style includes additional set of T-nuts down each side to attach lateral brackets
- I-Back and T-Back style have a back cut width measuring 2 3/4" less than the frame width to attach lateral brackets
- Full Width backs must be mounted in front of the uprights with forward adjustment hardware
|
|
 |
Back Base with Removable Cushion Modification
- Washable, zippered covers allows for easy removal of the cushion cover for cleaning
- Includes an upholstered back base and an upholstered back cushion with removable cover
- Available in all foam and upholstery options
|
|
 |
Adjustable Lumbar Modification
- Adjust both the height (4" range of adjustment) and depth (3" range of adjustment) of the lumbar to create a custom fit and support of the lumbar area of the spine
- Built into our backs to allow for easy adjustments of the lumbar support under the upholstery
- Specify how high the center of the lumbar support should be from the bottom of the back; it will adjust 2" above and 2" below that position
|
|
 |
Rounded Corners Modification
- Rounds the top 2 corners of the back with a 1 3/8 " radius
|
|
 |
Grid Back Modification
The Grid Back modification changes the foam on the back to a grid-work of removable and
interchangeable 2" x 2" foam cubes, attached to base foam with hook and loop material. The
grid-work of foam cubes provides added comfort by working independently of each other and
allows for easy modification by pulling the cubes out for carving or replacing with other
cubes of different density.
- 2" x 2" foam cubes
- Added comfort and easy customization
- Additional 1/2 " layer of polyurethane foam added to the back of the plywood base
- 2" of foam and a stretchable cover such as premium Lycra (part #51) is recommended
|
|
 |
Embroidery/Monogram Modification
- Standard embroidery on backs is positioned on the front of the back with the lettering centered 1 1/2 " down from the top of the back
- Choose Script or Block style lettering and thread color
|
|
 |
Embroidery Options
Airplane |
American Flag |
Butterfly |
Dinosaur |
Dolphin |
Flames |
Princess |
Puppy Dog |
Race Car |
Rainbow |
Frog |
|
|
|
